1/2" pneumatic ratchet, 136 Nm

An extremely compact 1/2" pneumatic impact wrench made from highly durable material. USAG.

- Straight and compact head: ideal for use in confined spaces

- Extremely compact reversible model with rear air outlet

-outer body made from high-strength composite material

-front steel housing

-1/2" drive

-M10 screw

-maximum torque (Nm): 136

-No-load speed (rpm): 280

-Average air consumption (l/min): 113

-Recommended air pressure (bar): 6.2

-Sound pressure dB(A): 99 ± 3

-Sound power dB(A): 110 ± 3

-Vibration (m/s²): 9.1

-Air connection (“): 1/4

-Internal diameter of air hose (mm): 10

-Weight: 1.2 kg

-Length: 260 mm

⚠️ Important warning: Start-up and correct lubrication of the pneumatic ratchet

To ensure a long service life, maximum power and smooth operation of your pneumatic ratchet, the use of a specialised lubricant is essential. Dry compressed air causes high friction, which can quickly lead to wear on the internal gears and damage to the mechanism.

Instructions for the correct lubrication of the pneumatic ratchet:

Automatic lubrication via the mains supply (Recommended): Always use the lubricant supplied with the system when operating these devices. For optimum regulation and even lubricant delivery, we recommend using the FACOM N.580 dedicated lubricant regulation filter.

Manual lubrication (if the system does not have an automatic lubricator): If you do not use an automatic lubricator in your compressed air network, you must add lubricant manually. Every 8 hours of operation, manually inject 0.5 to 1 cm³ of the designated lubricant through the unit’s inlet connection. LUBRICATING OIL

💡 MAINTENANCE TIP: Consistent lubrication before each work cycle or every 8 hours of use prevents the seals and gears from drying out and maintains your ratchet’s full tightening power. Wear and tear caused by operating the ratchet without lubricant is not covered by the warranty.